Tryckluftsassisterande andningsskydd

Compressed air-fed full mask with excellent fit, high protective effect and very good breathing comfort for the toughest areas of use. Polycarbonate visor. With filter back-up intended to be connected to a suitable compressed air source with breathable air. The overpressure that then occurs in the mask prevents the surrounding polluted air from reaching the user. The breathing tube can also be removed from the mask and it can then be used as a clean filter cover. Can be used as an alternative to filter protection in all situations where such is recommended. This applies in particular to heavy or long-term work and when the contaminants have poor warning properties or are particularly toxic. Made of materials that do not cause sparks during friction, which enables use in explosive/flammable environments. The control valve is equipped with a warning whistle that gives a signal if the amount of air falls below the recommended amount. The compressed air should be cleaned with a compressed air filter type Sundströms SR 99-1.
Contents: Full face mask with breathing hose and polycarbonate visor, control valve, belt, screw cap, cover cap, pre-filter holder, flow meter, filter adapter and user manual.< BR> Working pressure: 5-7 bar
Air flow: 150-320 l/min
Operating temperature: -10°C - +55°C
Assigned protection factor: 1000 (4A, 4B)
Nominal protection factor: 2000 (4A, 4B)
Weight: 750 g (without control valve)

Approved/Certified according to:
EN 14594:2005

Compressed air additive for compressed air feeding of Sundström full or half masks. The combination is connected to a suitable compressed air source with breathable air. The overpressure that then occurs in the mask prevents the surrounding polluted air from reaching the user. Can be used as an alternative to filter protection in all situations where such is recommended. This applies in particular to heavy or long-term work and when the contaminants have poor warning properties or are particularly toxic. Made of materials that do not cause sparks during friction, which enables use in explosive/flammable environments. The control valve is equipped with a warning whistle that gives a signal if the amount of air falls below the recommended amount. The compressed air should be cleaned with a compressed air filter type Sundströms SR 99-1.
Contents: Connection box with hose, control valve, belt, locking ring, flow meter and user manual.
Working pressure: 4-7 bar
Air flow: 150-320 l/min
Operating temperature: -10°C - +55°C
Assigned protection factor: 30 (3A) with half mask, 1000 (4A, 4B) with full mask
Nominal protection factor: 200 (3A, 3B) with half mask, 2000 (4A, 4B) with full mask
Weight: 80 g (without control valve)

Approved/Certified according to:
EN 14594:2005

Compressed air-fed half mask with filter back-up and excellent fit, high protective effect and very good breathing comfort for the toughest areas of use. Intended to be connected to a suitable compressed air source with breathable air. The overpressure that then occurs in the mask prevents the surrounding polluted air from reaching the user. Can be used as an alternative to filter protection in all situations where such is recommended. This applies in particular to heavy or long-term work and when the contaminants have poor warning properties or are particularly toxic. Made of non-sparking friction material, enabling use in explosive/flammable environments. The control valve is equipped with a warning whistle that gives a signal if the amount of air falls below the recommended amount. Flow meter for checking the air flow is included. The compressed air should be cleaned with a compressed air filter type Sundströms SR 99-1.
Contents: Mask with breathing hose, control valve mounted on waist belt, cover, pre-filter holder, flow meter and user manual.
Working pressure: 4-7 bar
Air flow: 150-320 l/min
Usage temperature: -10°C - +55°C
Assigned protection factor: 30 (3A)
Nominal protection factor: 200 (3A, 3B)
Weight: 280 g (without control valve )

Approved/Certified according to:
EN 14594:2005
EN 140:1998

(HTML text not available)

Compressed air hose for Sundström's compressed air-fed breathing masks. Delivered assembled with safety coupling and nipple.

Compressed air filter that cleans ordinary compressed air to breathable quality. The unit consists of regulator, pre-separator and main filter (SR 292) which are mounted in a covering sheet metal frame. Placed on the floor or hung on the wall. The pre-separator, which has automatic drainage, separates coarse particles, water and oil. Main filter SR 292 consists of a carbon filter part (approx. 500 g) surrounded by two particle filters P3. The air is cleaned here of any remaining particles/gases/vapours/odors. Used together with Sundström's compressed air-fed respirator.
Use temperature: -10°C - +55°C
Inlet: R1/2"
Input pressure: 6-10 bar
Outputs: 1 pc (safety coupling), 1 pc plugged
Max air flow: 900 l/min (three user)
Filter surface P3: 2200 cm²
Active carbon: 500 g
Adsorption capacity: 100-150 g oil

Can be combined with all modular head protection from 3M and ensures an even and adjustable air flow of 170-305 l/min. Integrated activated carbon filters filter out odors from the compressed air. Requires a working pressure of 3.5–8 bar and is extremely quiet thanks to the integrated silencer. With additional connection for compressed air tools. Can be connected to the 3M™ AirCare™ filtration unit to clean the compressed air before it is fed into the regulator.
Conforms to SS-EN14594.

(HTML text not available)

Y-connection: 3/8" BSP, 1x external thread - 2x internal thread (incl. 2 intermediate nipples with external thread.) For connection to Aircare air purification station.

3-way connection: 3/8" BSP internal thread (incl. 4 intermediate nipples with external thread) to connect to Aircare air purification station.

Filtersats till Aircare 500GR bestående av förfilter och kolfilter

Filtration station is required when there is no access to clean air. Consists of three different filtration units, each of which removes liquids, particles, oil mist and odors from compressed air, providing the welder with clean breathing air. Equipped with a hose coupling for air hose 1/4'' (6.4mm), an adjustable regulator (0.5-10 bar), double outlet with quick coupling and air gauge. The dual outlet allows two welders to use the same station. Available for wall mounting or frame mounted for portable use.

CEJN-koppling 342 till Vortemp-, Vortex- och Flowstream-regulator med 1/4 hane utvändigt.