Hålsågar, tillbehör hålsågar

Hole saw HSS Bi-metal. With variable teeth 4/6 TPI.
Material: M42
Saw depth: 48 mm

Extension for hole saw, with 7/16" or 3/8" attachment, 320 mm long.
Also fits Presact holder for hole saw with Quick-change.

Hole saw set 15 parts, HSS BI-Metall, M42. Hole saws with cutting depth 48 mm and variable teeth 4/6 TPI.
Contents:
12 pcs hole saws: 22, 25, 29, 38, 44, 51, 57, 67, 76, 92, 114, 121 mm.
2 pc holder for hole saw.
1 pc extender for hole saw holder. Length 320 mm, bracket 7/16".

Sandflex® hole saws are designed to cut holes in most materials such as wood, steel and metal. Fits all drilling machines, both portable and stationary. Cutting depth max 38 mm (1 1/2"), 4/6 teeth per inch.
With the help of an extension shaft, it is possible to cut through material in several layers. The cutting depth is basically limited only by the ability of the operator to remove the cores that accumulate in the hole saw.The side slots make the cores easy to remove.
The diameter indicates the nominal hole size +1.5 mm/ -0.0 mm.

Bi-Metall hole saw for efficient hole punching in stainless steel, steel and sheet metal as well as for pipes up to 3 mm thick. Saws 20 percent faster than traditional hole saws. Constant tooth pitch 5.5 teeth/inch.
Saw depth: 41 mm.

(HTML text not available)

Hole saw set with Bi-Metall hole saws in Fast Cut design, cutting depth 41 mm. With constant tooth pitch (5.5 teeth/inch). For fast and efficient hole punching in stainless steel, steel and sheet metal as well as for pipes up to 3 mm thick. Supplied in a practical storage bag made of protective material.

Hole saw set with Bi-Metall hole saws in Deep Cut design, sawing depth 51 mm. With variable tooth pitch. Suitable for most materials such as stainless steel, steel, wood and plastics. Supplied in a practical storage bag made of protective material.

Bi-Metall hole saw. For wood and metal.
Saw depth: 48 mm.

Centering drill for Bosch hole saw holder Power Change (with black sleeve). 1/4" machine bit attachment for quick change of drill bits in the holder.

Set of 6 Power Change adapters for standard hole saws. Easily mounted on hole saws to be used together with Bosch hole saw holder with quick-change function Power Change and Power Change Plus.
Contents:
2 pcs for hole saw Ø 14-30 mm (connection thread 1/ 2"-20 UNF)
4 pcs for hole saw Ø 32-210 mm (connection thread 5/8"-18 UNF)

Hole saw with carbide teeth that provide up to 10 times longer life, higher heat and wear resistance compared to bi-metal hole saws. Tooth geometry with 4 teeth/inch for faster and more aggressive cutting plus deep collars for improved material removal. Offset teeth for less resistance. Deep entrances for easier plug removal, also facilitates the removal of thin materials. Useful for drilling holes in stainless steel, high-alloy steel, aluminum, composites, plastic, fiberglass, plastic-coated wooden boards, wood with nails, etc.

Hole saw with HM blade, for cutting holes in most materials. Cuts more than 5 gr faster than traditional hole saws and has a long service life. Cut wood, chipboard, MDF boards, laminate, plastic, gypsum, lightweight concrete, leca, fiberglass as well as tiles and stone materials up to a hardness of 6.
Cutting depth: 58 mm.

Center drill for Pro-Fit hole saws.

Extension fitting PRO-FIT hole saw holder.

Kit with hole saws for cutting holes in most materials. With carbide tip and integrated Click & Drill adapter. Cuts more than 5 times faster than traditional hole saws and has unmatched longevity. Cuts wood, chipboard, MDF boards, laminate, plastic, plaster, lightweight concrete, leca, fiberglass as well as tiles and stone materials up to a hardness of 6. Supplied in protective storage bag.
Type 1: Hole saws 57, 71, 73, 77, 83 mm. 1 pilot drill HSS with Click & Drill attachment.
Type 2: Hole saws 29, 41, 51, 56, 71, 77 mm. 2 HSS pilot drills with Click & Drill attachment.
Type 3: Hole saws 16, 19, 22, 29, 35, 41, 51, 56, 71, 73, 77 mm. 2 pcs pilot drill HSS with Click & Drill attachment.
Type 4: Hole saws 19, 25, 32, 35, 51, 54, 76, 92, 114 mm. 2 HSS pilot drills with Click & Drill attachment.
Type 5: Hole saws 35, 51, 76, 92, 114, 125 mm. 1 pilot drill HSS with Click & Drill attachment.
Type 6: Hole saws 25, 35, 40, 44, 56, 71 mm. 2 pcs pilot drill HSS with Click & Drill attachment.
Type 7: Hole saws 19, 25, 35, 40, 51, 56, 64, 71, 76, 111 mm. 2 pcs pilot drill HSS with Click & Drill attachment.
Type 8: Hole saws 19, 20, 22, 25, 29, 35, 44, 51, 64, 67, 76 mm. 2 pilot drills HSS with Click & Drill attachment.
Type 9: Hole saws 22, 29, 35, 44, 51, 64 mm. 2 pcs pilot drill HSS with Click & Drill attachment.
Type 10: Hole saws 35, 40, 51, 57, 60, 74, 86, 92, 105, 114, 133 mm. 1 pc pilot drill HSS with Click & Drill attachment, 1 pc pilot drill for concrete with Click & Drill attachment.
Type 11: Hole saws 35, 40, 52, 57, 60, 74, 83 , 105 mm. 1 pc pilot drill HSS with Click & Drill attachment, 1 pc pilot drill for concrete with Click & Drill attachment.
Type 12: Hole saws 16, 19, 20, 25, 32, 41, 51 , 57, 60, 74, 83 mm. 2 HSS pilot drills with Click & Drill attachment.

Ostoppbar hållbarhet i de mest krävande applikationerna. Tanddesign: 3,5 tanddesign med en positiv 10 gradig vinkel medför följande fördelar: Snabbare och mer aggresiv sågning. Förbättrad värmeskingring bidrar till att tänderna förblir vassa längre. Djupare formade kragar bidrar till mer effektiv bortförande av material samt förhindrar stopp och att värme bildas. Speciellt formad tandvinkel betyder mindre risk för att fastna på tunnare material. Tandmaterial - Matrix II snabbstål i tänderna. Matrix II stål innehåller 8% kobolt vilket tillåter tänderna att behålla den ursprungliga tandhårdheten även vid höga arbetstemperaturer när den används i metall. Bi-Metall konstruktion ? Tänder av snabbstål är lasersvetsade på en kropp av låglegerat stål. Tänderna är sedan vakuum härdade till 65 HRC vid en temperatur på 600 °C för att ge maximal hållbarhet samt livstid. På grund av den höga slitstyrkan hos Matrix II stål är dessa hålsågar idealiska för håltagning i svårt och hårt material såsom rostfritt stål och syrabeständiga stål samt mjukare material såsom trä. Hålsågens kropp - Hålsågens 1,27 mm tjocka stål gör att hålsågens kropp blir stel. Effektivt borrdjup är 41 mm. Bakplåtens design - Bakplåtens design är konstruerad med tjockt stål så att hålet inte blir större med tiden. 4 drivhål för lättare användning av adapter. Perfekt tillverkad rundad bakplåt för bättre centrering, speciellt vid borrning i större diametrar. Dessa högkvalitativa hålsågar är den perfekta lösningen vid håltagning i alla material: Stål upp till 1000 N/mm² styrka. Rostfritt stål och syra-resistent stål. Icke järnhaltiga material. Gjutjärn. Aluminium. Trä. Fiberträ. Gips. PVS. 10 hålsågar: ?19, 22, 25, 29, 32, 35, 38, 44, 51, 57 mm. Adapter ? för hålsågar ? 14 ? 30 mm. Adapter ? för hålsågar ? 32 ? 152 mm. 2 x pilotborr, 1/8? insexnyckel.

HSS Pilotborr 83 mm i hög kvalitet för DEWALT Rapid Load hålsågshållare. Tackvare den unika konstruktionen behövs inga verktyg för att byta borr.

Hålsåg av bimetall med patenterad tandning som ger hålsågen snabbare skär och längre livslängd vid borrning i trä, metall och plast. De stora, kontinuerliga spåren hjälper till att enklare få bort plugg och rester av materialet. Den slitstarka bimetallkonstruktionen ger mångsidighet för användning i olika material och en sågdesign som gör det möjligt att skära djupare.

Holder for hole saw. The length of the center drill is adjustable.
PS1020-02, fits hole saw 14-30 mm, hexagon socket 3/8", 1/2"-20UNF thread
PS1020-9, fits hole saw 32-210 mm, hex socket 3/8", 5/8"-18UNF thread
PS1020-10, fits hole saw 32-210mm, hex socket 7/16", 5/8"-18UNF thread

Center drill for holder for hole saw.

HSS drill for QuickChange holder PS1022Q-01. Ø 6.35 mm. With 1/4" hex quick chuck attachment.

Hole saw set 13 parts, HSS BI-Metall, M42. Hole saws with cutting depth 48 mm and variable teeth 4/6 TPI.
Contents:
10 pcs hole saws: 16, 22, 25, 29, 38, 44, 51, 57, 67, 76 mm.
2 pc holder for hole saw.
1 pc extender for hole saw holder.
Length 320 mm, bracket 7/16".

Sandflex® hole saws are designed to cut holes in most materials such as wood, steel and metal. Fits all drilling machines, both portable and stationary.
Cutting depth max. 38 mm (1 1/2"), VIP hole saws have a varied tooth pitch. 4/6 teeth per inch.
With the help of an extension shaft, one can cut through material in several layers. The depth of cut is basically limited only by the operator's ability to remove the cores that accumulate in the hole saw.The side slots make the cores easy to remove.The diameter indicates the nominal hole size +1.5 mm/ -0.0 mm.
Extra large hole saws:
168 mm and 210 mm with 6 tdr/in. Cutting depth max 38 mm.
177 mm with 4/6 tdr/in. Cutting depth max 50 mm.
All large hole saws with 0° cutting angle .

Hole saws in carbon steel with carbide tipped teeth. For sawing in ceramics, brick, laminate, fiberglass, etc. Fits all drills, both stationary and portable. Cutting depth max 38 mm, 4 teeth per inch.
Holder see hole saw accessories.

Holder for hole saws. With HSS center drill. Holders with the additional code QC have a quick attachment and no tools are needed when changing the hole saw. Large holders, for hole saws from 32 mm and up, are equipped with drive pins for transferring large forces to the hole saw. It is recommended not to use holders with 8.5 mm shank (11/32") for hole saws over 100 mm. For drilling in abrasive materials, center drill 3834-DRL-CT with carbide tip is recommended.
3834-ARBR-730 with triangular shank and round drill body.
3834-ARBR-630, -930, -1130 with hexagonal shank that provides a more stable design and makes it easy to remove from the hole saw.
3834-ARBR-9100, -11152 and -16152 with Power Driver which increases strength and eliminates play between holder and hole saw by transferring the force from the holder to the solid hole saw stop, instead of to the thread
* = SB packed.
TRI = Triangular shaft

Hållare med SDS+ tapp för maskiner med snabbchuck (Hilti och Bosch). Eliminerar byte av maskin för arbete med hålsåg.

Hole saw holder with ejector function to easily remove the core. Intended for Bahco universal hole saws hole saws. Supplied with HM center drill for wood and brick.

Hole saw holder with ejector function to easily remove the core. Intended for Bahco carbide-tipped hole saws. Supplied with HM center drill for fiberglass and masonry.

Hållaradapter för passning av liten hållargänga (1/2 - 20 UNF) till stor hålsågsgänga (5/8 - 28 UNF). Rekommenderas ej till hålsågar över 44 mm.
För hållare -630, -730, -930, -1130.
För hålsåg 32-152.

Drill in HSS high speed steel. The drill makes holes in the workpiece before the teeth of the hole saw engage, while keeping the hole saw in the correct position during sawing. Standard drill in Bahco hole saw holder.

Center drill equipped with carbide tip with special properties, hardness and geometry. Very high cutting capacity in all machinable materials from wood and plastics to brick and concrete. Used in combination with Bahco carbide hole saws.

Long center drill with carbide tip. High capacity in all machinable materials from wood and plastics to brick and lightweight concrete. Fits Bahco hole saw holder with Quick-Eject function, model 3834-ARBR-930EL and 3834-ARBR-9100EL.

Center drill with carbide tip. All-round drill with high cutting ability in various materials such as fiberglass, masonry and wood. For use with carbide-tipped hole saws. Fits Bahco hole saw holder with Quick-Eject function, model 3834-ARBR-930ES and 3834-ARBR-9100ES.

Extension shaft in special steel for better access in difficult situations.
EXT-1: Fits holder -1130, -11152, -11152QC.
EXT-2: Fits holder -930, -9100.

(HTML text not available)

3834-SET-62-16/50 Hole saw set with the six most common sizes for work in the electrical installation industry. Contains hole saws: 16, 20, 25, 32, 40 and 50 mm and holders 3834-ARBR-930 and 3834-ARBR-9100.

Universal hole saw with carbide teeth for wood, MDF, plaster, plastic, wall tiles, etc. With wide side groove for removing drilled material. When drilling holes in tiles, carbide drill bit XA014C must be used.
Cutting depth: 54 mm.

Quick change system for hole saws. Adapter is mounted on the hole saw and then quickly and easily connected to the hole saw holder without tools. Practical when frequently changing hole saws between different diameters.

Hole saw holder with quick change function for simple and quick changes of Starrett hole saws. Insert nut is mounted on hole saw and then quickly and easily connected to quick-change holder.
SAQ15-4: Holder with hexagon bracket, insert nut A1KC, A10KC and drill A015C.
SAQ15-5: Holder with SDS+ mount, insert nut A1KC, A10KC and drill A015C.