ESD produkter

For stabilizing benches with leg braces and as an attachment for columns and extensions.
Attachment extension frame/hurts. Distance when the extension frame is to be used for quick assembly.
Colour: Beige.

Strong table top coated with different surface coatings. The boards have a solid wooden core and are interlocked with wood fiberboard, provided with a colored ABS plastic strip all around. The oak parquet boards are equipped with an aluminum profile on the front edge and also on the back edge of 2000 and 2500 mm.
Laminate Granit: The market's toughest and most durable table top, coated with direct laminate. It is dimensionally stable, withstands heat without being affected by welding fumes and solder and is easy to keep clean. Oil and aggressive chemicals are no problem. High density chipboard 38 mm.
ESD laminate: Coated with gray dissipative ESD high pressure laminate. In the lower edge of the board recessed 8-pin earthing terminal for easy connection to earth connection box and earth, placed 100 mm right short-long side. Can be obtained with alternative connections on special order. Book edging all around.
ESD mat: Covered with gray heat-resistant dissipative ESD table mat. Ground connection (push button) mounted in the rear left edge of the disc and connection for wrist strap with 10 mm connection (push button) in the right rear edge. The connections are placed 35 mm from the short/long side of the disc.
Can be obtained with alternative connections on special order. Beech edge molding all around
All boards are pre-drilled with mounted M 8 threaded bushings for a very stable attachment of heavy leg trestle, hurts and bench box.
Steel rust protection.
Under shelf, board.

Made of strong sheet steel. The drawers have ball bearing guides (extendability 110%). Lockable. The upper part of the frame has two recesses to facilitate assembly. The drawers are available in 4 different heights 50, 100, 150 and 300 mm, drawer combinations see table. If the hurtsars are to be mounted on H table, L table, Ergo, 1 pillar crank or motor, suspension rails must be used. In tabletops thickness 42 mm, the frame is attached directly to the board with the supplied French screw.
Max. load per box: 40 kg.
Colour: Beige lacquered frame, blue boxes RAL 5005.
Not suitable for independent assembly.

Made of black, conductive plastic for ESD-protected storage. Folded back edge for hanging. Stackable.